IoT Gateway & Connectivity: LoRa vs Wi-Fi vs Cellular

The tradeoffs we weigh when picking how an IoT device gets its data out — LoRa, Wi-Fi, or cellular.

Wi-Fi: when infrastructure already exists

For fixed installations inside a building that already has reliable Wi-Fi, it's usually the simplest and cheapest option — no new infrastructure, high bandwidth, low added cost. The tradeoff is that the device is tied to that facility's network.

LoRa: long range, low power, no dependency on existing networks

LoRa is part of our standard connectivity stack alongside NRF32 for exactly this reason — it lets a device transmit over long distances on very little power, without depending on Wi-Fi or cellular coverage. It trades bandwidth for range and battery life, which is the right trade for a sensor sending small, infrequent readings.

Cellular: mobile and out of range of anything else

For a device that moves — like a cold-chain shipment in a vehicle — cellular connectivity (including simple SMS-based transmission) means the device isn't dependent on any fixed network along its route. This is the approach behind T-Remo's ability to report sensed parameters via SMS during transport.

How we choose

The decision comes down to three questions: does the device move, is there existing network infrastructure at the deployment site, and how much power is available. Answering those first usually narrows the connectivity choice before we even look at sensors.

Related products